Installation Guide

Table Installation Instructions

1. Preparation Before Installation

1. Check all parts against the parts list to ensure they are complete and undamaged. Common parts include: tabletop, table legs, mounting plates, screws, washers, hex wrench, etc.

2. Prepare tools: Phillips screwdriver, electric screwdriver (optional), tape measure, level (optional), cleaning cloth.

3. Prepare a clean, flat and spacious area for installation.

2. Installation Steps

1. Clean the connecting surfaces of the tabletop and table legs.
Attach the mounting plates to the table legs with screws (do not fully tighten yet).

2. Turn the tabletop upside down. Align the legs with the pre-drilled holes on the bottom of the tabletop.

3. Secure the legs to the tabletop with screws. Tighten all screws evenly.

4. If adjustable feet are included, twist them to make the table stable and level.

5. Carefully turn the table upright. Check for stability and make sure all screws are tight.

3. Notes

For safety, it is recommended that two people install large or heavy tables.

Do not use non-original screws to avoid damaging the product.

Do not overload the table beyond its stated weight capacity.

If the table wobbles, adjust the feet or re-tighten the screws.